| Customization: | Available |
|---|---|
| After-sales Service: | Guaranteed |
| Warranty: | Guaranteed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ISO | Grade | Density g/cm³ |
Hardness HRA(HV) |
TRS Mpa |
Applications |
| K05 | YG3 | 15.00 | 90.5 | 1300 | Suitable for finishing of cast iron and non-ferrous metal |
| K10 | YG6X | 14.80 | 91.0 | 1560 | The finishing &semi-finishing ofcastiron and nonferrous metals and also for the machining of manganese steel andhardening steel |
| YG6A | 14.70 | 91.5 | 1510 | ||
| K15 | YG6 | 14.90 | 89.5 | 1670 | Suitable for the roughing of cast iron and light alloys and also for the milling ofcast iron and low-alloy steel |
| K20 | YG8 | 14.60 | 89.0 | 1840 | |
| K05-K10/M20 | YT26 | 14.00 | 92.5 | 1600 | Suitable for fine and semi-finishing machining of chilled cast iron and non ferrous metals with good performances of ther mosetting and wearresistance,also suitable for turning and milling ofmaese steel and hardened steel. |
| K20 | YD201 | 14.90 | 91.0 | 1800 | Suitable for semi-finishing and the roughing of cast iron and lisht alloys and also for themilling of cast iron and low alloy steel. |
| M05-M10 | YS8 | 13.90 | 92.5 | 1720 | It can be used for the finishing of iron based and nickel based high-temperature alloys and high-strength steel and it can also be used for the finishing of chilled cast iron,heatresistt sfalnless steel,high manganese steelandc barcened steel. |
| P30 | YC30S | 12.90 | 90.0 | 1600 | used for the milling of steel,cast steel andalloy steel. |
| P35-P40 | YC40 | 12.90 | 91.0 | 2200 | suitabie for the heavy duty turning ofsteel and cast steel with a big feel rate under unfaorable working condifion. |
| P40 | YM40 | 12.75 | 90.0 | 2100 | Suitable for the heavy duty tuming of steel and cast steel with a big steel rate and also for face milling. |
| YC45 | 12.75 | 90.0 | 2300 | ||
| M10 | YW1 | 13.00 | 91.0 | 1290 | Suitable forfinishing and semi-finishing of stainless steel and conventional alloy steel. |
| YW3 | 12.90 | 92.0 | 1390 | ||
| YW4 | 12.30 | 92.0 | 1390 | ||
| M20 | YW2 | 12.90 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly uesd for the machining of railway wheel hubs. |
| P10 | YT05 | 12.60 | 92.5 | 1260 | Suitable for the finishing and semi-finihing of steel and cast steel with a moderate feed rate and a rather highcutting speed. |
| YT15 | 11.30 | 91.0 | 1300 | ||
| P20 | YS14 | 11.40 | 91.5 | 1550 | Suitable for the finishing and semifinishing ofsteel and cast steel. YS25 is specially used for themilling of steel and cast steel. |
| YT14 | 11.40 | 90.5 | 1400 | ||
| YS25 | 13.00 | 90.5 | 1780 | ||
| P30 | YT5 | 12.80 | 89.5 | 1560 | Suitable for the heavy duty rough tuming of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
Please contact us for other specifications and models.
){kind=link}